Cart
LAN-CAT6A-P+II (R)
The LAN-CAT6A is a surge protective device (SPD) for Ethernet network lines, compatible with Gigabit Ethernet, 10GBase-T and PoE++ (IEEE 802.3bt) over RJ-45 connections.
The LAN-CAT6A is a surge protective device (SPD) for Ethernet network lines, compatible with Gigabit Ethernet, 10GBase-T and PoE++ (IEEE 802.3bt) over RJ-45 connections. Compliant with IEC 61643-21 (Category C2/D1), IEC 61000-4-5, UL (File E140906) and RoHS, it supports transmission bandwidths up to 500 MHz with low transmission loss and a voltage protection level of 500 V or less. It handles impulse currents of 5 kA (8/20 µs) and 2.5 kA (10/350 µs), and an LED indicator makes it easy to check deterioration. Ideal for network cameras, wireless access points, VoIP equipment and outdoor network devices, it mounts on a 35 mm DIN rail, including conductive rails for batch earthing.
Conforming standards
- IEC61643-21:2009 ／ JIS C 5381-21:2014
- IEC61000-4-5:2005 ／ JIS C 61000-4-5:2009
- UL File Number: E140906
- RoHS compliant
Features
- Discharge type circuits
- Gigabit Ethernet 10GBase-T enabled
- PoE++ (IEEE802.3bt) enabled
- DIN rail mountable (35mm)
- Mountable on conductive DIN rail for batch earthing
New !! Easy checking deterioration
Application
- Gigabit Ethernet
- Network cameras
- Wireless LAN accress point
- VoIP enabled telephones and servers
- Outdoor installed network devices
Characteristics
| connector | ― | RJ-45 | 8-pole8-core |
| Supported Lines | ― | 10BASE-T
100BASE-TX 1000BASE-T 2.5GBASE-T 5GBASE-T 10GBASE-T PoE PoE+ PoE++ |
IEEE802.3
IEEE802.3u IEEE802.3ab IEEE802.3bz IEEE802.3bz IEEE802.3an IEEE802.3af IEEE802.3at IEEE802.3bt |
| Transmission bandwidth used | ― | DC ～ 500 MHz | ― |
| Transmission Loss |
1～100MHz ～250MHz ～500MHz |
≤ 1.0 dB
≤ 2.0 dB 4.0 dB or less |
― |
| Near-end crosstalk attenuation |
1～100MHz ～250MHz ～500MHz |
>32.3 dB
>35.3 dB >26.7 dB |
― |
| Coding error rate | ― | 0.01 % or less | ― |
| Maximum continuous working voltage UC | ― | DC 60 V | Between each line and ground |
| Rated current | ― | 2,400 mA | IEEE802.3af, IEEE802.3at, IEEE802.3bt |
| Breakdown voltage | 100 V/s | 160 V ～ 300 V | Between each line and ground |
| Voltage Protection Level Up | 1.2/50 μs, 10 kV | 500 V or less | Between each line and ground |
| Impulse durability | 8/20 μs | 5 kA, 10 times | Category C2 |
| Impulse durability | 10/350 μs | 2.5 kA, 2 times | Category D1 |
| Maximum discharge current | 8/20μs | 10kA, 10 times | Total value between 8 cores and shield to ground |
| AC durability | 50 Hz, 0.5 A, 1s | 5 times | ― |
| Impulse Reset | DC 60 V, 600 mA | Within 30 ms | Between PoE power supply terminals |
| Insulation Resistance | DC 60 V | 1,000 MΩ or more | Between each line and ground |
| Deterioration diagnosis | In a dedicated tester | LED on: Normal / LED off: Deterioration (replacement required) | ― |
| mass | ― | about 60 g | ― |
Related products
The LAN-CAT5e-P+II is a surge protective device (SPD) for Ethernet network lines.
The L-13KIS-1G is an isolation-type surge protector for Gigabit Ethernet network lines.
The LAN-1000IS-2 is an isolation-type surge protector for Gigabit Ethernet network lines.
